McLaren Remote Key Fob Cover – Glossy Black Dry Carbon Fiber (No Logo)

Real dry carbon fiber replacement cover for cracked/worn key fob shells. Glossy UV clearcoat. Simple DIY install with 3M double-sided tape. No McLaren logo.

• Material: Real Dry Carbon Fiber (vacuum molded) – not a vinyl sticker/decal
• Finish: Glossy Black with UV-protective clearcoat
• Install: 3M double-sided tape (peel-and-stick)
• Purpose: Replace cracked or worn carbon fob cover without buying a full $1,000+ remote
• Photos: Before/After images included on product page
• Logo: Ships plain (no logo) due to copyright restrictions

Compatibility

Fits the factory remote key fob for:

• McLaren MP4-12C (2012–2014)
• McLaren 650S (2015–2017)
• McLaren 675LT (2015–2017)

What’s Included

• (1) Dry carbon fiber key fob outer cover (replacement shell)
• Pre-applied 3M double-sided adhesive

Installation

1. Pull off the old cover (usually held by double-sided tape).
2. Clean the fob surface with isopropyl alcohol and let dry.
3. Test-fit the new cover to confirm alignment.
4. Peel the 3M liner, apply firm pressure for 30–60 seconds.
5. Allow 24 hours for adhesive to fully cure.

Important: Cover only—does not include electronics or a complete key. No McLaren logo.

Shipping: Free Ground Shipping to the 48 contiguous U.S. states.